Categories: No Bugs Everything Work Audio Clear Cm12 based theme Just Perfect Full Creadit _Raj Shekhar xda |
MysticOSv7 Marshmallow For Lenovo A536
↧
↧
CWM-recovery
Categories: CWM recovery for lenovo a536 INSTALLATION Download and flash the zip with your current recovery |
↧
Lenovo A536 stock recovery
Categories: LENOVO A536 STOCK RECOVERY Restoring Lenovo Stock Recovery on Lenovo A536 – Restoring Lenovo stock recovery sometime needed when we want to perform OTA update, on Lenovo once you change your recovery to custom recovery you could never be perform an OTA update. INSTALLATION You don't need a PC to install this just flash the [...] |
↧
Lenovo P1 Turbo + Root
Categories: taking from original Lenovo p1a42 + custom root. OTA update not support. known bug : NFC just flast it via pc. note : dwyor |
↧
Rom Galaxy Note 3
Bug :
1. S Note Force Close
2. Remove/Delete SMemo.apk on system/app using Root Explorer.
3. Push SMemo.apk on system/app and don't forget to change permission.
Instruction :
1. Flash Port Note 3 using TWRP recovery mode.
2. Wait and enjoy.
Features :
- Samsung apps
- Init.d suport
- Zipalign all apk for optimizing ram
- All tweak performance
- All tweak HSDPA/HSUPA speed
- Dual 3G
- 3G video call support
- Gps Ok
- Wifi Ok
- Bluetooth Ok
- See more at: http://freewareid.blogspot.co.id/2014/10/rom-galaxy-note-3-for-lenovo-a516.html#sthash.IDmHCSxl.dpuf
Instruction :
- flash or install Port Note 3.zip with TRWP recovery mode. or click here.
- wait and enjoy.
rom by : Doeway All Evidence
- See more at: http://freewareid.blogspot.co.id/2014/10/rom-galaxy-note-3-for-lenovo-a516.html#sthash.IDmHCSxl.dpuf
↧
↧
1614 Vibe 3.1 ST Rooted
Changelog:
1. Optimization of power consumption, improve phone standby capacity.
2. A lot of useless software and resources to streamline official.
3. Open ROOT permissions, authorization to use SuperSU.
4. Add busybox instruction set, advanced users may need.
5. New Dolby sound, you can use the boot.
6. The status bar ON OFF Dolby sound support.
7. Optimization framework to enhance fluency, rapid and smooth
8. Optimize network performance optimization global touch response.
9. Improve the smooth sliding effect, touch sensitivity.
Install Instructions:
1. Boot into recovery mode TWRP Recommended.
2. Now select wipe – Advance wipe, dalvik cache, system , cache , data.
3. Select install & select downloaded zip file.
4. Install success & reboot.
Gapps:
1. Use any of the older version dev supported Gapps and flash it allow all permissions.
↧
LolliCraft
Categories: Wonderful mod android 5.1 *** Go to my blog for details*** |
↧
AOSP 4.4.4 Stable
AOSP 4.4.4 Stable for Lenovo S920 Cn base
Once I sent a test message, I was full of messages from people about testing so I decided to work on it further and release the firmware for all. This firmware is designed for chrmhoffmann wiko Stairway. He is the same developer who built the CM11 for MTK6589 and he said; the AOSP has a similar level of performance in the CM11.
Built on latest AOSP source code
Fix for stage-fright vulnerability (the first ever AOSP rom for p780)
Fixed the camera and sensors (It was not easy due to 4.4.4)
Changed to ebony black interface
Added advanced reboot menu
Fixed the storage issues
Fixed Bluetooth, GPS
Removed inbuilt ROOT and added Superuser
Updated the time zone file
Updated the APN list
Removed unused applications
Removed the ugly G and 3G indicators
Removed the AOSP gallery and added modified Lenovo Camera
Added SD card SWAP (For Lenovo Camera)
Removed unused applications and resources.
Optimized and zip aligned
Fixed some minor bugs
Additional init.d scripts and build.prop tweaks
Added engineer mode option in developer settings menu
Framework improvements, corrected the battery power calculation
Improved the performance and battery stability
Magnetic cover unlock
LED notification for calls and messages
USB OTG (FAT)
Option to install app in SD-Card or Phone
Replaced modem to P780 V24 2015/01/06
↧
Lenovo S939
How to Flash Lenovo S939 Stock ROM:
Note: Keep in mind that prior to flash check out the battery time. It should be 70-80% charged. Backup your device data including personal data before flashing or installing firmware on your device.
Step 1: Download Lenovo S939 Stock ROM Firmware zip file in your PC and extract it. (It includes Scatter files, SP Flash Tool, and Drivers).
Step 2: Download Lenovo USB Drivers in install in PC. If already installed quit this step.
Step 3: Power Off / Switch of your smartphone (it is better to remove battery after switching if possible)
Step 4: Go to extracted folder “extracted in Step 1” > SP flash tool > you will see Flash-Tool.exe > Open this to Launch setup.
Step 5: One setup is launched Click on > Download Tab > Scatter Loading. Now locate scatter firmware file (Present firmware folder extracted in Step 1) and load it.
Step 6: Connect your device with PC via data cable (Keep in mind the device should be switch Off). Now click on Download Button / Upgrade Button (having sign of Green Arrow) to begin flash Flashing.
Step 7: Wait Until process complete. In end of Successful Flash Lenovo S939 Stock ROM Firmware, a Green dot / ring will appears.
↧
↧
ACER E3
ACER E3 PORTED P780
-Latest Android 4.4.2
-Latest Android 4.4.2 Lenovo Camera with Gallery
-Good Battery Backup
-Playing Games Smoothly
-Buttery Smooth
-Settings themed
-Acer Liquid E3 Status Bar
-3G SIM Switch
-Sim Toolkit
-New Bootlogo
-Init.d Scripts
-Latest Playstore-Acer Liquid E3 LockScreen
-Acer Liquid E3 Dialer
-Acer Liquid E3 Contacts
-Acer Liquid E3 Messages
And Many More………
setting
1. Download the firmware and throw it in the root of the memory card (/ sdcard)
On the phone off hold down buttons: Volume Up + Down, then simultaneously switch
3. Wipe Making and Swape to Factory Reset
4. Select the firmware
5. We are waiting until the firmware is established.
or depending on rekaveri:
1. Download the firmware and throw it in the root of the memory card (/ sdcard)
2. View Recovery:
On the phone off hold down buttons: Volume Up + Down, then simultaneously switch
3. Make all wipe, apart from sd card and eMMC (or if there is a preloader)
4. Select the firmware
5. We are waiting until the firmware is established. "
↧
GidGat Ultimate
Rom os 4,4,2 for P780 Base CN & ROW
Install via CWM or TWRP
1. wipe data/factory reset
2. wipe cache partition, mouns and storage
3. format/cache
4. format/data
5. format/system, go back, advanced
6. wipe dalvik cache, go back
7. install zip
8. reboot system now
↧
Lenovo A369i
How to Flash Lenovo A369i Stock ROM:
Note: Keep in mind that prior to flash check out the battery time. It should be 70-80% charged. Backup your device data including personal data before flashing or installing firmware on your device.
Step 1: Download Lenovo A369i Stock ROM Firmware zip file in your PC and extract it. (It includes Scatter files, SP Flash Tool, and Drivers).
Step 2: Download Lenovo USB Drivers in install in PC. If already installed quit this step.
Step 3: Power Off / Switch of your smartphone (it is better to remove battery after switching if possible)
Step 4: Go to extracted folder “extracted in Step 1” > SP flash tool > you will see Flash-Tool.exe > Open this to Launch setup.
Step 5: One setup is launched Click on > Download Tab > Scatter Loading. Now locate scatter firmware file (Present firmware folder extracted in Step 1) and load it.
Step 6: Connect your device with PC via data cable (Keep in mind the device should be switch Off). Now click on Download Button / Upgrade Button (having sign of Green Arrow) to begin flash Flashing.
Step 7: Wait Until process complete. In end of Successful Flash Lenovo A369i Stock ROM Firmware, a Green dot / ring will appears.
↧
EMUI v3.0 Stable ROM
multilang
EMUI v3.0 Stable ROM current version: v3.0 for P780 base CN/ROW
Features:
- Pre-Rooted
- Removed unwanted apps
- External SdCard fixed
- AddAway
- Xposed with some modules
- Holo Light Reboot
- Flashify
- SuperSU (full root)
- Stock bugs removed
- Other changes…
-
setting
1. Download the firmware and throw it in the root of the memory card (/ sdcard)
On the phone off hold down buttons: Volume Up + Down, then simultaneously switch
3. Wipe Making and Swape to Factory Reset
4. Select the firmware
5. We are waiting until the firmware is established.or depending on rekaveri:
1. Download the firmware and throw it in the root of the memory card (/ sdcard)
2. View Recovery:
On the phone off hold down buttons: Volume Up + Down, then simultaneously switch
3. Make all wipe, apart from sd card and eMMC (or if there is a preloader)
4. Select the firmware
5. We are waiting until the firmware is established. "
↧
↧
Lenovo Z90-3
ROM Mobile Lenovo Z90-3 - ROM Android 6.0.1
ONLY MSM8916
Official ROM Lenovo Z90-3 Version: VIBEUI_V3.5_1615_7.26.1_DEV_Z90-3 – zoom_tdd-user 6.0.1 MMB29M – ( Developer version )
Gapps not include – No Rooted
Language support : EN/CN
Rom install :
CWM
Step 1: Download the custom ROM copied to an external SD card root directory
Step 2: the shutdown state. While holding down:
– Power button + volume button up, to enter the recovery mode.
– Wipe Data / Factory Reset -> delete all user data
– Wipe Cache Partition -> Wipe cache
Step 3: Return to recovery main interface Install zip from sdcard -> choose zip from sdcard -> Select your ROM
Step 4: Brush complete, restart the phone Patience required – first boot takes a while
↧
Lemonade 1614 VIBEUI 3.1
#changelog
based on VIBEUI_V3.1_1614_LTT LEMONADE
Dear Comrades it is my pleasure to deliver the nuevalimonada marshmallow flavor, after struggling a bit for the new version of android, here is the result.
characteristics
SuperSU 2.65 by Chainfire
Gapps 6.0 & arm64 by Google
busybox
1.3.8 Lspeed
AdFree by BigTinCan
terminal emulator
kernel Adiutor
ToolHero
It's file explorer
Dolby Atmos
PON-3 Audio Mod bymrchezco1995
Xposed Framework v80 & Xposed installer by rovo89
Music App without Chinese
App radioFM without Chinese
Video Lenovo App without Chinese
Bugs found:
The app Btnotification is not supported.
recommendations
Lower animations in settings Developer 0.5
In the Date and Time settings set auto time zone.
Configure AdFree
Install instructions
- Install custom recovery TWRP ( All Version Working )
- Boot into recovery mode.
- Now select wipe ( factory rest ).
- Advance wipe ( button blue ) & select partitions , dalvik cache, system , cache , user data ( just first user data )
- Select install & select downloaded zip file.
- Install success.
Credits & Acknowledgements
The master of masters @Xancin, for their infinite patience and great teachings.
The LTT @ sergio151179, @ infodreams, @ franjhv, @ mariobetis
To the devs that was mentioned in the characteristics of the rom and do what they do.
A @Breixo and my whole family MDS @Staff, for letting me be part of the forum.
↧
Focus-UI
Focus-ui for lenovo P780 base cn/row
instal :
1. wipe data/factory reset
2. wipe cache partition, mouns and storage
3. format/cache
4. format/data
5. format/system, go back, advanced
6. wipe dalvik cache, go back
7. install zip
↧
VIBEUI_V3.5_1615_7.37.1_DEV_K50-T5+Gapps TWRP backup
Categories: Installing Instructions: latest twrp recommend Wipe, then Restore the backup) DETAILS: Download the rom backup and EXTRACT it move in folder “TWRP” into INTERNAL MEMORY -Boot into TWRP Recovery Select WIPE > Advanced Wipe > Select “Dalvik cache”, “Cache”, “System”, “Data” partitions > Swipe to confirm - Go to RESTORE > Select Storage > Select [...] |
↧
↧
LG G3
ROW base
firmware Features
It works like all: Awakening volume rocker, camera at 8.2014 and later, etc., multilanguage
instal :
1. wipe data/factory reset
2. wipe cache partition, mouns and storage
3. format/cache
4. format/data
5. format/system, go back, advanced
6. wipe dalvik cache, go back
7. install zip
↧
Lewa OS v6
Categories: Lewa OS v6 for P780 base CN / ROW Languages: RU / CN / EN - Cons No Setting: - Zip file on the sdcard or throw the phone's memory - In the boot mode rekoveri - Do wipe data factory reset and wipe cache - Flash zip archive - Reboot the device |
↧
Nexus v6.1 [4.4.3]
Categories: OS Nexus v6.1 [4.4.3] for P780 base row Very nimble in Lollipop style should work all the ice from the box, multilingual |
↧
More Pages to Explore .....
