Hi Guys,
Here is the AOSP Marshmallow ROM for A7000. It is ported from the 6753-zopo speed7.
It needs to be extracted to your TWRP folder and you can restore it. Remember to rename the last entry to your current twrp backup folder.
TWRPBACKUPSWCNZTWD6OFCMLFMR2016-04-26–11-37-22_ZP951_20160330-120131
or what shows up in your backup folder.
TWRPBACKUPSAIO-ROW2016-04-26–11-37-22_ZP951_20160330-120131
Cyanogenmod 13 for LENOVO A706
What works in Cyanogenmod 13
-Wi-Fi and Wi-fi access point
-Blyutuz
-GPS
-sensors
-Net
Sending SMS
-Photo Camera and a video recording from the camera
-Podsvetka Touch buttons
-Screen
-Tach screen
-Mobile Data transmission
-ROOT
-Vhodyaschie And outgoing calls
- And etc.
- Download firmware service google, twrp put it all on the SD MICRO CARD
- In your current flash file Recovery -> File
- Once in Recovery, press item reboot recovery
- After a new start Recovery
- Select Wipe and move the "slider", if you want, then click on the square and wipe it manually select all available items in addition to sd card.
- Select Install, select the firmware, wait until the installation is complete, and then select the file again with google apps.
- Press reboot
- Wait start (30 minutes)
Categories: Official firmware to be installed through the CWM or TWRP of Recovery |
CyanogenMod 11 Stable ROM for Lenovo A706
What works
Wi-fi and Wi-fi access point
-Blyutuz
-GPS
-sensors
-Net
Sending SMS (there is a choice in the settings)
-Photo Camera and video recording with the rear camera and front camera
-Podsvetka Touch buttons
-Screen
-Tach screen
-Mobile Data transmission
-ROOT
-Vhodyaschie And outgoing calls
-Record The line
-INTERNAL SD CARD disabled (150MB)
-The System is patched against vulnerabilities in MMS
This firmware from the device to the processor mt6592 (Xiaomi Redmi Note 3G WCDMA)
v 6.4.14
1. Custom kernel 1.2.13.71-xz
2. Working lights flashing during an incoming call
3. Working change position in the notification bar
4. Released patch bluetooth
5. Camera (.mp4, HDR, filters, proper preservation, 13MP)
6. Animated dividing point of the digital clock widget
7. Patches memory and the camera (See below.)
8. The camera added another flash mode (unlocked)
9. The camera adds the ability to pause the video shooting (unlocked)
10. In camera Added "Skin Tone" (unlocked)
11. Separate volume control (corrected) (unlocked)
12. The camera without an animation to switch between the front and rear
13. Work equalizer and sound enhancement headset
14. Works LED display and magnetic cover.
Support for updating via the Internet
This firmware ported from the project miuiPro.
Installation via custom rekovery TWRP 2.8.4.0 Rev.1 CN (http://4pda.ru/forum/index.php?s=&showtopic=567735&view=findpost&p=36720285 or https://depositfiles.com/files/c4h8igeu9 )
Language Support: multilanguage
• CYANOGENMOD 13 M 6.0
• FINAL STABLE fixed all bugs
INSTALLATION
1. Download the file
2.Zakinut archive with the firmware in the SD card
3.Voyti in custom rekaveri
4.Sdelat wipe
dalvik / cache
cache
data
5. Select the file on the SD card
6.Nachnёtsya installation
7.Zhdёm end firmware, reboot
Categories: ALPS.KK1.MP1.V2.10 – It is a source of Explay which is based on AOSP. Generally speaking easier official firmware from Explay. Just like the situation with the VIBE UI made a full emphasis on originality, whatever firmware is operated as a store without any quirks. Firmware is completely clean, no any modifications, and third-party software. Only [...] |
Official Firmware This is not the OTA update! All your data will be destroyed! S90-A_S239_151126_ROW for installation through QFIL
Version: 239
Date: 26112015
Language Multilingual
This is not the OTA update! All your data will be destroyed!
Important! The basic instructions for installing the firmware via QFIL in the cap threads missed the time to connect your phone to the PC: Turn off the phone, hold "Volume +" and connect to the PC. "Volume + hold to enter the menu. (Or turn off, hold both the" Power "and" Volume + ", after the appearance of the logo," Power "is released, and the" Volume + "to keep the entrance to the menu).
AsusZen 5 for P780 base row
If everyone is already tired of AOSP, then here's something new …
Really liked the firmware, even became interested in modifying it. Very beautiful. In ZenUI style in the guise of a droid 5.x There are settings to customize all sorts of buns and scones with. In general, quite worthy of the firmware! Port with China-Smart 6592.
Features
-Plavny Beautiful interface
-Works Quickly, nothing hindered
-There Customization settings
-Montiruyutsya Either memory, but the disc to record on a memory card default (which I consider a plus)
-Stable work
Not bad battery holds
[Castum ROM] K3 Note S424 ROW for SP Flash Tool Download drivers and software bundled archive
Сhanges
- Permissions ROOT
- Patch Stagefrigt 2016
- Updated translations (IT)
- Single tap to standby Added
Press once Time at the top, contact standby
Press for a few seconds timetable in the upper right to open the on / off menu
- Advanced Options (Settings – Other)
- Added ad blocker for app
- Integrated the ability to uninstall system app
- Removed almost all chinoiserie
- Home rearranged the interface after the Setup Wizard
- Calendar and Browser Asus
- Updating the logo while charging offline
Updated translations (IT)
- Fix stability and performance of the system and games
- Fix writable SD card
- Single tap to standby Added
Press once Time at the top, contact standby
Press for a few seconds timetable in the upper right to open the on / off menu
- Security Patch stagefright (not vulnerable)
- Removed Lenovo Music (replaced with Google Play Music)
Cyanogen-Apps.
**NOT SURE IF IT IS ALREADY POSTED SOMEWHERE ELSE **
The Cyanogen Apps Package gives users of CyanogenMod access to apps previously only available on Cyanogen OS, the commercial version that comes preloaded on retail smartphones. By flashing the Cyanogen Apps Package, you gain access to AudioFX, Theme Chooser, Theme Store, Gallery, and dialer with Truecaller. You’ll also be able to create a Cyanogen account, as well as contribute to shaping future products.
Whats Included ?
AudioFX
Theme Chooser & Themes Store
Dialer with Truecaller
Dialer with Truecaller
Install it the normal way …. flash with TWRP
Categories: iOS ROM lenovo A536 (BUGS FIXED) =>Looks the same as iPhone6 =>iOS 9.1 UI =>iOS fonts =>iOS bootlogo =>iOS inspired Launcher =>iOS icons =>settings app themed as iOS =>iOS status bar And a lot more features…… INSTALLATION.. >Put the zip in your SD card >Boot in your recover TWRP,PHILZ or CWM >Wipe data >Flash the [...] |
Categories: Today I present you the exodus rom for lenovo S650 It is for ROW Steps:- 1.Put in sd card the zip file 2.First do factory reset and then wiipe preload(if present),system,data,cache,dalvik cache 3.Flash the zip 4.Enjoy(First bootup takes time) Gapps not included just download gapps 5.1 pico from google All the credits goes [...] |
Attention! It is forbidden to upload the firmware on other sites without my permission! If you want to put it on another site, write to me about it, or lay preserving all my initial links!
Please, write all comments on my site. because here i dont reads and dont write direct links in comments, this is the only one way to make money from my ROM… Donations no work for my country, only WebMoney. Thanks!
Languages: MultiLanguage, 40+ languages
IF YOU LIKE MY WORK PLEASE DONATE . EVEN 1 $ IS APRECIATED.
Based SDK 19
FIX ALL
Default Storage = internal storage
Credits :
Allah SWT,
Muhammad SAW,
Xiaomi Developer,
Kindly note that Nobody, No one, is authorised to make mirrors of my work, Share my work, copy my work/Files anywhere!
Friends, kindly DONATE and ENCOURAGE me to continue my work.
Paypal ID for Donation is- carlbishop9@gmail.com
Skrill Account- carlbishop9@gmail.com
Hello Friends,
Here i present you my miui7 v6.4.28 Full ROM + OTA patch (Multilanguage)
for Lenovo K3 Note (MT6752):
There are 02 methods to install this new ROM. Kindly follow any ONE Method completely and read it completely before proceeding. Do not mix both Methods.
Method A: For the one’s who are already using my ROM/OTAs (Strictly Follow):
- Disable "Nu Player" from developer options!
- Backup already installed miui7 ROM.
- Reboot phone into custom recovery and wipe cache, wipe System and wipe Dalvik cache only.
- Download and flash ROM/OTA via custom recovery from link given above.
- Again wipe cache and wipe Dalvik cache only.
- Reboot phone and Enjoy!
Method B: Fresh Installation. The one’s who are using my ROM first time (Strictly Follow):
- Backup your phone, data, everything before flashing this ROM as i will not be responsible for any bricked phones, lost IMEI Numbers or any harm made to your device during this process, though I did not faced any such problem while I followed the following process.
- In order to flash this ROM, one has to be on Custom recovery (TWRP Recommended),
Download from link given in my other ROM post and Flash it on your K3 Note.
- Reboot to custom recovery and go to Wipe-> Advance Wipe-> and wipe Dalvik Cache,
System, Cache, Data, Internal Storage (all data, apps etc. will be deleted).
- Flash the ROM downloaded from above link.
- After first boot Disable "Nu Player" from settings/additional settings/developer options/here….
- ENJOY miui7 on Lenovo K3 Note!
Xposed Installation Method (Strictly Follow):
- Just Flash Xposed_Fix.zip WITHOUT wipes and enjoy Xposed on My Developer ROM!
- Don't forget to install xposed installer from my other ROM link to get xposed modules working.
Fixes/Changes till v6.4.28 by me:
- DIrac+Dolby+Maxx.
- Useful Xposed Modules added to download section.
- Flash light/Torch fixed- sometimes not working, now OK.
- Fixed NV Ram error in Wi-Fi.
- Battery: Charging and Backup Improved.
- Drop down menu lag fixed.
- Gallery lag fixed.
- Xposed Support added.
- SD Card Default storage patch (On Demand).
- Homescreen Menu 4*6 Patch. If you want to remove it, delete- com.miui.home from:
system/media/themes/default/com.miui.home.
- Camera Shutter sound fixed, Camera image quality tweaks.
- Offline Battery charging logo fixed.
- LED Notification fixed- now working (only green LED notification working. For whatsapp and
other apps, select green color LED from whatsapp settings to make it work).
- Full HD video recording fixed. No green lines in Full HD video recording.
- Fixed proximity sensor, sometimes misbehaving while calls, now OK.
- Camera fixed- images no more hang in HDR mode, normal mode.
- Heating issue resolved (not tested for gaming).
- Super User updated to v2.52. SU binary updated.
- Build.Prop tweaks (as asked by some users).
- Multilanguage (check Screen Shots).
- Antutu after first boot- 47000+.
- Pre-rooted.
- Minimal Gapps.
- Themes & Fonts working.
- OTG Working.
- Fast and Buttery Smooth UI.
BUGS: Double Tap To Wake not working.
Don’t forget to Donate, Like, Star Rate, Subscribe, share your reviews and report bugs so that i can continue my work….
Note: Keep in mind that prior to flash check out the battery time. It should be 70-80% charged. Backup your device data including personal data before flashing or installing firmware on your device.
Step 1: Download Lenovo A390 Stock ROM Firmware zip file in your PC and extract it. (It includes Scatter files, SP Flash Tool, and Drivers).
Step 2: Download Lenovo USB Drivers in install in PC. If already installed quit this step.
Step 3: Power Off / Switch of your smartphone (it is better to remove battery after switching if possible)
Step 4: Go to extracted folder “extracted in Step 1” > SP flash tool > you will see Flash-Tool.exe > Open this to Launch setup.
Step 5: One setup is launched Click on > Download Tab > Scatter Loading. Now locate scatter firmware file (Present firmware folder extracted in Step 1) and load it.
Step 6: Connect your device with PC via data cable (Keep in mind the device should be switch Off). Now click on Download Button / Upgrade Button (having sign of Green Arrow) to begin flash Flashing.
Step 7: Wait Until process complete. In end of Successful Flash Lenovo A390 Stock ROM Firmware, a Green dot / ring will appears.
Note: Keep in mind that prior to flash check out the battery time. It should be 70-80% charged. Backup your device data including personal data before flashing or installing firmware on your device.
Step 1: Download Lenovo A328 Stock ROM Firmware zip file in your PC and extract it. (It includes Scatter files, SP Flash Tool, and Drivers).
Step 2: Download Lenovo USB Drivers in install in PC. If already installed quit this step.
Step 3: Power Off / Switch of your smartphone (it is better to remove battery after switching if possible)
Step 4: Go to extracted folder “extracted in Step 1” > SP flash tool > you will see Flash-Tool.exe > Open this to Launch setup.
Step 5: One setup is launched Click on > Download Tab > Scatter Loading. Now locate scatter firmware file (Present firmware folder extracted in Step 1) and load it.
Step 6: Connect your device with PC via data cable (Keep in mind the device should be switch Off). Now click on Download Button / Upgrade Button (having sign of Green Arrow) to begin flash Flashing.
Step 7: Wait Until process complete. In end of Successful Flash Lenovo A328 Stock ROM Firmware, a Green dot / ring will appears.
Note: Keep in mind that prior to flash check out the battery time. It should be 70-80% charged. Backup your device data including personal data before flashing or installing firmware on your device.
Step 1: Download Lenovo A396 Stock ROM Firmware zip file in your PC and extract it. (It includes Scatter files, SP Flash Tool, and Drivers).
Step 2: Download Lenovo USB Drivers in install in PC. If already installed quit this step.
Step 3: Power Off / Switch of your smartphone (it is better to remove battery after switching if possible)
Step 4: Go to extracted folder “extracted in Step 1” > SP flash tool > you will see Flash-Tool.exe > Open this to Launch setup.
Step 5: One setup is launched Click on > Download Tab > Scatter Loading. Now locate scatter firmware file (Present firmware folder extracted in Step 1) and load it.
Step 6: Connect your device with PC via data cable (Keep in mind the device should be switch Off). Now click on Download Button / Upgrade Button (having sign of Green Arrow) to begin flash Flashing.
Step 7: Wait Until process complete. In end of Successful Flash Lenovo A396 Stock ROM Firmware, a Green dot / ring will appears.
Note: Keep in mind that prior to flash check out the battery time. It should be 70-80% charged. Backup your device data including personal data before flashing or installing firmware on your device.
Step 1: Download Lenovo A606 Stock ROM Firmware zip file in your PC and extract it. (It includes Scatter files, SP Flash Tool, and Drivers).
Step 2: Download Lenovo USB Drivers in install in PC. If already installed quit this step.
Step 3: Power Off / Switch of your smartphone (it is better to remove battery after switching if possible)
Step 4: Go to extracted folder “extracted in Step 1” > SP flash tool > you will see Flash-Tool.exe > Open this to Launch setup.
Step 5: One setup is launched Click on > Download Tab > Scatter Loading. Now locate scatter firmware file (Present firmware folder extracted in Step 1) and load it.
Step 6: Connect your device with PC via data cable (Keep in mind the device should be switch Off). Now click on Download Button / Upgrade Button (having sign of Green Arrow) to begin flash Flashing.
Step 7: Wait Until process complete. In end of Successful Flash Lenovo A606 Stock ROM Firmware, a Green dot / ring will appears.
