Quantcast
Channel: » LENOVO
Viewing all 3149 articles
Browse latest View live

CyanogenMod 11 [A536]

$
0
0

Thanks a lot for Nameless Porting Team for giving me this opportunity to make this ROM.

ROM Flashing

  1. Obtain a ROM of your choice, many can be found in your devices development forum on XDA Forums or a alternate android development site.
  2. Once you have downloaded the ROM File, mount your phone's SD card and copy there the .zip file.
  3. Power off the device and then boot up to recovery, it is different per device. If you are unsure how to boot up to your Android device's recovery menu then look it up in your device page in this wiki, the forums or other tutorials on your device.
  4. In your phone's custom recovery bootloader, locate the menu options which allow you to wipe the phone. Whenever changing roms, it is a good idea to make a Nandroid or BART backup first, then wipe Data/Factory and Dalvik-Cache, OR, in the case of 4Ext Recovery Touch users, you can do a standard full wipe in one click: go to WIPE / FORMAT > Format all partitions EXCEPT SD Card, before flashing the new ROM, or if the ROM you want to flash comes with an Aroma Installer, you can do the standard fullwipe in Aroma as it usually comes with that option before proceeding with the installation.
  5. Once your phone has been wiped, go back up to the root of the menu and select 'Flash Zip from SD Card' (the text may be different in your Recovery).
  6. Locate the ROM .Zip file you wish to flash.
  7. Confirm the flash by following the on-screen instructions (i.e.: pressing the trackball, pressing the call button, etc.)
  8. If no errors arise during the flashing process then the ROM flash was successful. Reboot the device.

A269i_S016 with russian, english, indonesian, china, vietnam

Lenovo K3 Note FlyMe OS Port

$
0
0

FlyMe port for Lenovo K3 Note.

 

I am the creator of this rom. You are allowed to post it somewhere else, but please always give me proper credits.

 

HOW TO INSTALL RECOVERY

  1. Enable Android Debug Bridge (ADB) in developer options on your phone
  2. Plug your phone to your computer
  3. Use commandline to reboot to bootloader: adb reboot bootloader
  4. Check that your device is properly detected with command: fastboot devices
  5. Flash recovery with command: fastboot flash recovery k3note-recovery.img

 

HOW TO INSTALL ROM

  1. Make sure that your phone is powered on and plug it to your computer
  2. Put the rom (Flyme_K3Note_port.zip) and the patch (K3Note_port.zip) in your phone's internal memory
  3. Use commandline to reboot to recovery: adb reboot recovery
  4. Use option Wipe data/factory reset
  5. Use option Wipe cache partition
  6. Use option Advanced > Wipe dalvik cache
  7. Use option Mounts & storage > Format system partition
  8. Go to Install zip from sdcard and install Flyme_K3Note_port.zip
  9. Repeat step 8 with K3Note_patch.zip
  10. Return to CWM main menu and choose Reboot system now
  11. Rom will boot. Remember that first boot takes a long time

 

WHAT IS WORKING

  1. WiFi
  2. GSM Network (2G/3G/4G). Mobile data does not work though
  3. Bluetooth
  4. Display
  5. Touchscreen
  6. GPS seems to work too
  7. Well, rom is really smooth

 

KNOWN BUGS, AND THINGS THAT DO NOT WORK

  1. After first boot, touchscreen may not work. Just reboot and it'll be fixed
  2. Screen brightness is buggy
  3. No audio at all
  4. MicroSD is not detected (but can certainly be fixed easily later)
  5. Camera does not work at all

VIBEUI V2.0 1522 5.34.1 ST A936

$
0
0

ABOUT ROM

OTA  update for Lenovo A936

Language : En, Cn and Tw

ADDED :

Multilanguage

Mini Gapps

Vibe 2.5 launcher

12 theme such as Ios 8.1 , Mi Note, Galaxy Note 4, Miui V6 , Emui 3.0 and many more…

5 font to choose

Lenovo logo

Remove bloatware

Fully deodexed and zipalign

WHAT NEW

New kernel (boot image)

New system

 

How to install:

Install via custom recovery, any custom recovery of your choice will do…

Included…carliv touch 3.3..New option in wipe menu – wipe all – preflash

Boot into recovery –> Wipe menu  –> Wipe All-Preflash –> Yes wipe all –> Yes

choose zip from external sd card

that it…done ..

First boot may take awhile…At the first boot, after everything was setup, go to Super SU, update the binary first and then reboot. You may see few empty folder, dont worry just click on it and it will disapear .

Rearrange the icon to your liking and done. For Clock weather widget, you can get any from play store to replace the stock one ( only work in CN )

—-DWYOR—-

Thanks for your support

and many thanks to russian forum ..especially  Minotavrusus and friend for the MIUI project..

 

 

CyanogenMod 12.1 – Team Superluminal

$
0
0

Team Superluminal cyanogenmod 12.1 for Lenovo K910

CyanogenMod (pronounced sigh-AN-oh-jen-mod), is a customized, aftermarket firmware distribution for several Android devices. Based on the Android Open Source Project, CyanogenMod is designed to increase performance and reliability over Android-based ROMs released by vendors and carriers such as Google, T-Mobile, HTC, Lenovo, etc. CyanogenMod also offers a variety of features & enhancements that are not currently found in these versions of Android.
 
This is Team Superluminal cyanogenmod 12.1 port for your Lenovo K910

Not officially supported, but might work on K910L and K910e

 

We have spent ernomous amount of time for porting this ROM.

All work is done in our spare time. We give this for you as free of charge.

If you like our work, please consider donating some money for a new porting equipments.

Or just few bucks for team members to have a nice cold beer after long day of coding ;)

Donate!

 

NOTE: This is nightly build, there might be some minor bugs!

- Beta releases has adb insecure & root mode by default

 

CM12.1 ROM Highlights

- No manufacturer pre-installed crappy software, you choose what to install!

- Privacy Guard, you choose what permission apps can have!

- Lots of UI tweaks, you choose the UI features!

- CM Theme Engine (lots of themes available)

- Overall fast, smooth and stable

- Good battery life

- Performance modes (also power save mode)

- Good multilanguage support

- Pre-rooted (enable in developer settings)

- Audio FX (equalizer)

- And all other cyanogenmod goodies! Too much to list here ;)

http://www.androidbeat.com/2015/02/cyanogenmod-12-cm12-features/

 

Changelog

CyanogenMod 12.1 Changelog here

cm-12.1-20150623-UNOFFICIAL-kiton RC20

MD5: cb4882e27c3c072564217d2454e73e9c

- Fixed power off charger only mode (OTA also works now)

- Sync with CM12.1 source (lots of changes)

NOTE: First boot takes longer time, because SC6500 modem FW update (blue led blinks)

NOTE2: Remember factory reset when coming from any other ROM than previous version of TS CM12.1

 

Older_Changelogs SelectShow>

 

K910 firmware update recovery flashable zips:

See download links @ top of the page.

From VIBEUI v1516: k910_firmware_update_v1516 (latest, recommended)

From VIBEUI v1511: k910_firmware_update_v1511

NOTE: FW UPDATE ZIP ONLY FOR K910, not for K910e or K910L

NOTE2: You don't necessarily need this! If you are coming from older ROM than VIBEUI v1507, it is recommended to install FW update.

 

How to install:

NOTE: If you dont have custom recovery installed yet, please see instructions for that elsewhere. (see TS TWRP recovery page)

1) boot into lollipop compatible TWRP (or similar) recovery (TS TWRP recommended)

2) Backup -> swipe to backup

When coming from other ROM: (also CM11/CM12 or want to clean install)

3.1) Wipe -> Factory reset

When updating existing superluminal CM12 ROM:

4) install cm-12.1-xxxxxxx-UNOFFICIAL-kiton.zip (select from storage or via adb sideload)

5) install gapps (if you need/like)

5.1) Gapps can be downloaded from various sources. See download link (BaNkS gapps) at top of the page or get one from here

5.2) Install K910 recovery flashable firmware update if needed.

6) reboot

7) profit :)


NOTE: All changes in system partition are lost when you update ROM.

 

What's working:

DUAL SIM (Enable in ROM Extra Settgins)

Double tap to wake (Enable in ROM Extra Settgins)

Smart cover (Enable in ROM Extra Settgins)

SIM1 RIL (mobile network & data)

SIM2 RIL (mobile network & data)

Wifi

Bluetooth

GPS

Network location

Audio (playback/input/routing/headphones/etc)

RM Radio

Camera

Hardware acceleration and OpenGL rendering

Hardware video decoding & encoding

USB, USBOTG

Wifi-tethering

Sensors

LEDs

Performance modes

Multilingual

CM Builtin callrecorder

All cyanogenmod goodies ;)

 
Known issues/bugs:

- "Charging only" mode not implemented yet
- selinux in permissive mode
- Stock CM12.1 camera HDR mode does not work
- DUALSIM: DO NOT DISABLE SIM2. If SIM2 disabled, enabling is almost impossible without factory reset. Work around: Swap sim cards, then you can enable SIM2 again.
- Phone filesystem encryption reported not working (not tested, might work)
- When disabling button backlights, reboot is needed to make'em stay off (work around crappy lenovo kernel)

 

Installation issues:
Some users may not be able to install this ROM due to too small (1GB) system partition.

If in doubt, It is easy to find out size of system partition. 
Open RootExplorer (file manager) on your phone,  navigate to /proc, and open file "partitions" as text file. The 19th or 20th partition is for /system. if it is 1048676 then the system partition is 1G,if it is 1572864,then the system partition is 1.5G.

In case of 1GB partition, you have to download llaalways's repacked ROM with 1GB system partition.

1GB ROM Download: http://pan.baidu.com/s/1kTtHG27 password:9nsc

Fix partitions: you'll need to update your phone via stock sdfuse method with file: K910_SS_S_2_040_0109_131226.qsb and then install CM12.1

THX llaalways

 

Special thanks to:
- ekkilm (co-developer)
- llaalways (repacked ROM, bug hunting, general help)
- needk910 (v1516 fw update)
- CyanogenMod team & everyone who's been working on CM12.1
- BaNkS for gapps

 

Donors: (Big thanks for the support!)

- Aleksejs B****
- Francesco Paolo G*****
- Adam T******
- Marat K*******
- B-smart
- Lovas M****
- Плеханов ****
- Milan T****
- Bruno R*********
- wxppro
- All donors @ bbs.lenovo.com
- Rafal_ll
- Keith P******
- Nik093
- orutra
- Iliyan K******
- jibam
- NeWbIe
- kacer
- SwPiotrXD
- 陈****
- Aniello F*****
- llaalways
- Dorian87
- Stefan G*****
- masterakalin
- n3t5ky
- n1tro
- kacer
- Sir_Bommel
- blackpac
- richy4
- sgardev
- Remco ** ****
- misot
- kontax
- Pino13
- Платонов ****
- wot-hac
- Михаил ********
- jamiev90
- alexalexchic
- Alessio B.
- Aniello F*****
- didonch
- Nikolay A******
- maprotech
- dark72
- andomanju
- Jorge G***** M******
- wot-hac
- S34d0g
- papuse g****
- smcsekar
- Fernando G********
- Macrom
- Antoinex01
- Fabio I********

 

FAQ:

Q: How to enable Smart cover, Dual SIM or Double tap to wake support?

A: Open 'ROM Extra Settings' from settings and enable features you like.

Q: Where are performance modes?

A: Settings -> Battery or you can add it to notification drawer in settings.

Q: I can't find developer options and performance settings, why?

A: Settings -> About phone -> Click 'Build number' several times

Q: I don't have reboot options in power menu, why?

A: Settings -> Developer options -> Advanced reboot

Q: Why power button does not wake device?

A: Yes it does! You're just covering proximity sensor. There's "prevent accidential wakeup" option enabled by default.

 

Reporting Bugs:

Carefully describe how to reproduce the bug, if possible.

1) Grab a logcat right after/during the problem has occurred. (Please include at least a few pages of the log, not just the last few lines, unless you know what you're doing.)

in case of modem bugs, also "logcat -b radio" is needed. If possible log must be captured all way from boot.

2) If it is a random reboot, grab /proc/last_kmsg. (Do not bother getting a logcat unless you can get it just before the reboot. A logcat after a reboot is useless)

Look for /data/anr and /data/tombstones directories for crash logs to share.

Remember to provide as much info as possible. The more info you provide, the more changes there are we can reproduce bug and possible fix it. Please also do not report known issues. The following is a useful format to follow:

What is your phone model (K910, K910L, K910e, etc..)

- ROM Version

Are you using:

- Any kind of task killer.
- Xposed
- Dual SIM.
- other modifications; Provide any additional information (observations/frequency of problem/last version it worked on/etc) as needed.

Upload logs to for example pastebin or any filesharing service and sends logs to me. With PM or email: morphic.ts@gmail.com

 

We have spent ernomous amount of time for porting this ROM.

All work is done in our spare time. We give this for you as free of charge.

If you like our work, please consider donating some money for a new porting equipments.

Or just few bucks for team members to have a nice cold b**r after long day of coding ;)

Donate!

 

NOTE: This is nightly build, there might be some minor bugs!

 

ENJOY!

- Morphic, Team Superluminal

 

 

         /*
	 * Your warranty is now void.
	 *
	 * I am not responsible for bricked devices, dead SD cards,
	 * thermonuclear war, or you getting fired because the alarm app failed. Please
	 * do some research if you have any concerns about features included in this ROM
	 * before flashing it! YOU are choosing to make these modifications, and if
	 * you point the finger at me for messing up your device, I will laugh at you. Hard. A lot.
	 */

 

Xperia Z2 ROM for Lenovo A536

$
0
0

Xperia Z2 ROM for Lenovo A536

by Lindjie C. Cabatuan

Nameless Porting Team

 

 

Features:

  • Android 4.4.4
  • Xperia Z2 Interface
  • Dual SIM
  • Dual 3G Switch
  • Battery Efficient
  • Xperia Launcher
  • Walkman Music Player
  • Xperia Gallery
  • Xperia Launcher
  • Deodexed/Zipaligned
  • Eye-candy Interface

 


How to Flash ROM:

  • Place zip file of A7 ROM in SD Card.
  • Reboot into recovery (TWRP for example)
  • Select Wipe on Main Menu, then Swipe to Wipe User Data/Cache/Dalvik Cache
  • Go back to Menu, then select Install
  • Locate the ROM file (zip), then Swipe to Install. Wait for a few minutes as the ROM is being flashed.
  • Once the flashing is done, reboot the phone. Initial startup of the phone will take about 5-8 minutes as the ROM is being initialized for first use.

by Lindjie C. Cabatuan

Thanks for the Developers of this ROM.

Kernel version 3.4.67-ProtonKernel-v2.2r4

$
0
0

This is the kernel for Lenovo A830 MT6589 - unofficial

Kernel version:

Proton Kernel v2.2.r4 (KitKat) – 20.06.2015

Aroma installer

Add GPU voltage and frequency interface

Change proximity sensor values once again

Calibrate light sensor for bright-light conditions

Add F2FS and exFAT support

Enabled NTFS support

Remove ION/GPU debug and logging

Added SIO scheduler

Fix power-off charging bug

Build optimizations

Default volt – YES (stable)
Undervolt – NO (It is not stable)


Android Open Source Project 4.4.4


Kernel version


3.4.67-ProtonKernel-2.2


I.nfraR.ed@proton #1


Mon May 11 21:19:33 EEST 2015

286MHz / 1.05V



Works:
GPS – Yes
A-GPS – Yes
Wi-Fi – Yes
Camera HDR –Yes
Video – Yes
Accelerometer – Yes
Proximity sensor – Yes (1cm)
Rotating the screen – Yes
Bluetooth – Yes
USB – MTP – Yes
Sound – Yes


Radio – Yes


Flash – Yes


Front camera – Yes

Special thanks to I.nfraR.ed

LENOVO K50-T5 Vibe UI

$
0
0

ROM Mobile LENOVO K50-T5 - ROM Android 5.1

Update ROM LENOVO K50-T5 Version: VIBEUI_V2.8_1526_7.80.1_DEV_K50-T5 ( Developer version ) – Android 5.1

Changelog SelectShow>

 

————————————————————————————————————————————————————

Update ROM LENOVO K50-T5 Version: VIBEUI_V2.5_1523_7.175.1_DEV_K50-T5_WCC2 ( Developer version ) – Android 5.0

Changelog SelectShow>

 

————————————————————————————————————————————————————

ROM LENOVO K50-T5 Version: VIBEUI_V2.5_1515_7.50.1_DEV_K50-T5_WC59 ( Developer version ) – Android 5.0

Changelog SelectShow>

 

Gapps not include – Not Rooted

Language support: EN/CN

 

ROM Install :

CWM

Step 1: Download the custom ROM copied to an external SD card root directory
Step 2: the shutdown state. While holding down:
            – Power button + volume button up, to enter the recovery mode.
            – Wipe Data / Factory Reset -> delete all user data
            – Wipe Cache Partition -> Wipe cache
            – Advanced -> Wipe Dalvik Cache
Step 3: Return to recovery main interface Install zip from sdcard -> choose zip from sdcard -> Select your ROM
Step 4: Brush complete, restart the phone Patience required – first boot takes a while

 


S184ROW OTA

$
0
0

S181 to S184ROW OTA


ОФИЦИАЛЬНОЕ обновление с РУССКИМ языком для Телефона для Европейской версии аппарата !


Данное обновление не проверялась на устройствах, предназначенные для продажи в Китае, прошивайте на свой страх и риск! Это обновление предназначено для устройств, реализуемых на территории СНГ.


Номер сборки: ROW_S184


Дата: 26/06/2015


Создатель: группа R&D Lenovo


Состав: образы прошивок


ОС: Android 4.4.2


Описание: Обновление официальной прошивки


Размер: 10мб

S181 to S184ROW OTA
RUSSIAN OFFICIAL update with the language for the phone for the European version of the device!
The update has not been tested on devices intended for sale in China, sew on your own risk! This update is intended for devices sold in the CIS.
Build Number: ROW_S184
Date: 06/26/2015
Creator: Group R & D Lenovo
Ingredients: images firmware
OS: Android 4.4.2
Description: official firmware update
Size: 10MB

Lenovo K3 Note AOSP 5.1

$
0
0

AOSP 5.1 for Lenovo K3 Note.

 

Rom was not made by me but found on Chinese forum here: http://bbs.ydss.cn/thread-563596-1-1.html

All credits go to Nanj for making this rom.

 

HOW TO INSTALL RECOVERY

  1. Enable Android Debug Bridge (ADB) in developer options on your phone
  2. Plug your phone to your computer
  3. Use commandline to reboot to bootloader: adb reboot bootloader
  4. Check that your device is properly detected with command: fastboot devices
  5. Flash recovery with command: fastboot flash recovery k3note-recovery.img

 

HOW TO INSTALL ROM

  1. Make sure that your phone is powered on and plug it to your computer
  2. Put the rom (aosp-k3note-5.1.0.zip) and gapps (gapps-64bit.zip) in your phone's internal memory
  3. Use commandline to reboot to recovery: adb reboot recovery
  4. Use option Wipe data/factory reset
  5. Use option Wipe cache partition
  6. Use option Advanced > Wipe dalvik cache
  7. Use option Mounts & storage > Format system partition
  8. Go to Install zip from sdcard and install aosp-k3note-5.1.0.zip
  9. Repeat step 8 with gapps-64bit.zip
  10. Return to CWM main menu and choose Reboot system now
  11. Rom will boot. Remember that first boot takes a long time

 

AND FOR ANYONE WHO WILL ASK, YES, THE ROM IS MULTILANGUAGE

Tasted Custom Rom ARX3 Xperia mt6572

$
0
0

Still week Xperia series, following a custom rom Port ku With its 1 GB of RAM and suport Indonesian, immediately wrote Listen:

Among the features of this ROM:
-RAM 1GB Bossss Hehehe … Dual 3G, Deodexex, Xperia Look Like, Xperia Keyboard
-Xperia Boot animation -New Lockscreen
-Multi Language Indonesian suport
-Add Some Apps
-SWAP 350MB on System

-Multitasker Mode
-Joss Ultimate mode
-Gaming Mode
-Xperia Digital Clock
-Use Cyber-Shot ™
-Layar Die CRT ScreenOFF

-Sony Media Apps | Albums, Movie, Sound Ehanchement, Walkman
-XReality Engine
-Patched Services.jar
-ListView Animation
-vPagerUI | 3 Page Notification, Power Toggles, Sliders
-Add X-Gamer ROM Tweaks Engine cockroach

-New Firmware Rom – 140 828
-New Mali Driver with Tweaks
The new -Kernel Kernel: Amzen ™ _V1.5
-Camera New Driver | 1.3MPTapi special quality clear
-FIx
-Fix
to be 3MP setting in the display fillscreen Cyber-Shot and change the resolution to 3MP
How to Install / flash:

1.Go TO CWM / TWRP / CTR
2.WIPE SYSTEM / CACHE / DATA / Dalvik
3.Select "ZIP INSTALL FROM SDCard"
4.Select "ZIP CHOOSE FROM SDCard"
5.Select THE ROM.ZIP AND "yes"
6.REBOOT .. wait, …… AND ENJOY

Go here  : http://minority761.blogspot.com/2015/06/tasted-custom-rom-arx3-xperia-mt6572.html

CM10 Style

$
0
0

Categories:

This is a multilanguage rom (ported from andromax phone) added translations to it and modded it in a way to look like cm10, it using original cm10 apks. it gets fixed the wifi bug this rom can connect to all routers, antutu gives 13624 score.   not known bugs yet.

(Read more...)

XPERIA E4 BY PSIHOP

$
0
0

Cons:

  • GPS catches, but understands very long time.
  • Crooked offline logo. The interest has faded

Differences from the original:

  • Ported
  • Fixed the sound work
  • Fixed the camera
  • Fixed the rubbing nvram
  • Adapted native boot
  • Fixed minor bugs
  • I cleaned from garbage
  • Fixed the GPS work
  • Fixed memory
  • Fixed disks are not detected on PC
  • Replaced the modem. The modem 308 firmware
  • Fixed buttons
  • Changed DPI
  • And much more

 

INSTALL VIA TWRP

MIUI V6 5.6.4 ROW

$
0
0

1. make sure your current rom is ROW base

 

2. download all 3 files… put in sd card…

  

3. reboot into twrp… wipe factory

 

4. flash the miui v6 rom


5. a russian pop up box will appear


6. tick all- then click next on the right side


7. click next again


8. tick the tele communication according to your plan..if not available just click next..


9. choose whether u want to use s650 modem or s930.. i choose s650…click next


10. tick then next… wait for it to reboot

 


11. after had reboot into homescreen… setup all..

 


12. reboot into twrp again and flash dolby atmos and supercamera..reboot

 

PUSSY FAP 2.5

$
0
0

HOW TO FLASH THIS ROM? ;

 

*DOWNLOAD ROM, SAVE AT SD CARD

*GO TO TWRP

*BACKUP YOUR CURRENT ROM (optional)

*FULL WIPE

*WIPE CACHE

*WIPE CACHE DALVIK

*WIPE DATA

*INSTAL PussyFap v2.5 for Lenovo S650(ROW).zip FROM SDCARD

*HAVE DONE!! :D

 

CREDIT;

- PUSSYFAP TEAM

-XDA

-MUKLIS ZEROO

-And ALL MEMBER

 


Ali cloud OS 3.0

$
0
0

Gapps not include – no Rooted

Language support: EN/CN

Lenovo s898t + transplant latest version of Ali cloud OS 3.0 perfect theme switching dual card dual standby.


CWM


Step 1: Download the custom ROM copied to an external SD card root directory


Step 2: the shutdown state. While holding down:


            – Power button + volume button down, to enter the recovery mode.


            – Wipe Data / Factory Reset -> delete all user data


            – Wipe Cache Partition -> Wipe cache


            – Advanced -> Wipe Dalvik Cache


Step 3: Return to recovery main interface Install zip from sdcard -> choose zip from sdcard -> Select your ROM


Step 4: Brush complete, restart the phone Patience required – first boot takes a while.

 

Lenovo Z90-7 VIBEUI

$
0
0

ROM Phone Lenovo Z90-7 - ROM Android 5.0.2

ONLY MSM8936

Official ROM Lenovo Z90-7  Version: VIBEUI_V2.5_1526_7.43.1_DEV_Z90-7 – ( Developer version )

Gapps not include – No Rooted

Language support : EN/CN

 

Rom install :

CWM

Step 1: Download the custom ROM copied to an external SD card root directory
Step 2: the shutdown state. While holding down:
            – Power button + volume button up, to enter the recovery mode.
            – Wipe Data / Factory Reset -> delete all user data
            – Wipe Cache Partition -> Wipe cache
Step 3: Return to recovery main interface Install zip from sdcard -> choose zip from sdcard -> Select your ROM
Step 4: Brush complete, restart the phone Patience required – first boot takes a while

 

MIUI v.6

TWRP Recovery 2.8.7.0 for Lenovo K910SS / E

$
0
0

This is TWRP 2.8.7.0 recovery with custom Play theme for LENOVO K910SS / E version and it is compatible with 4.4.x ,  CM11, CM12 and CM12.1. This TWRP is compiled from lollipop source .

 

First of all, note the following:
a) You must be root
b) The bootloader must be unlocked (if not already unlocked, see instructions)​

Use this Unlock Bootloader instructions to unlcock bootloader.

 

Changelog:

" SelectShow>

 

Install only the modified recovery

Instructions:

Metod 1:
1. Lenovo_K910SS_TWRP-2.8.7.0_by_master_lie.zip  from the above links
 
2. Move zip file into sdcard

3. Restart your device in recovery

4. Select the archive and install TWRP Recovery
 
5. Reboot device
 
Metod 2:
1. FLASH_TWRP_recovery_2.8.7.0_K910SS_4.4.7z from the above links
2. Unpack the archive, so there are no gaps in the title and up the path to the unpacked folder, for example C: User Your_name FLASH_TWRP_recovery_K910SS_4.4
3. Run bat:
FLASH_recovery_with_unlocked_bootloader.bat - to flash recovery when unlocked (unlock) loader (fastboot).
FLASH_recovery_DD_with_root.bat - to flash recovery with of locked (lock) bootloader (fastboot), but with the right Root.
RUN_recovery.bat - for one time run recovery with unlocked (unlock) bootloader (fastboot), without flashing.
4. Wait for reboot device in new recovery.
5. Enjoy.
 

Please DO NOT mirror this

Custom rom samsung galaxy s duos

$
0
0

The release also Ni .. Custom rom mind stream samsung ane my version of that first plunge in share since duni android mod, halah2 … please enjoy for WHO would try ..

Actually dah 2x samsung rom mod port but this new one rom samsung galaxy that had no share

BRIEF FEATURES SIMAK MBAH: SUP Dolby ,, ,, Smooth definitely work fast 3G Dual Multitasking game ,, ok ,, Font Unix Battery Samsung ,, especially economical mode of data no fly hehe..fix 12 mp camera Clear .. ETC ETC feel alone

** NI rom already suporrt dolby so if not using Dolby sound a bit small, tp can use this audio pach: patch raising voice rom

Please create their own with tweak and tweak game battery backup om dwyor course ..

(It's good for the game off the data off the fuel off notif etc., use a task killer before play)

How to install the ROM:
Sign Into Recovery, Backup create that fear, Wipe data / factory reset, wipe cache is partition, advanced> wipe Dalvik cache, Install zip from sdcard (looking for his rom) Install and wait patiently a few minutes walk and the process isntalasi flash ROM Reboot your new Nikamati sob ….

Credit thanks:
= Allah, Prophet Muhammad, a family friend
= Lenovo Indonesia Admin user and members
= Evass A7S *
All MTK dev = mod
= All groups android, group forums and web blogs anywhere in the world, who do not forget kesebut can be edited n PM later hehe …

 

Viewing all 3149 articles
Browse latest View live




Latest Images