!!!!!Attention s660 only Chinese version, the Russian version have hardware changes and give error in the kernel at startup.!!!!!!!!
Content:
VibeUI Android KitKat 4.4.2
Languaje: Chinesse-English
Original recovery (provided a TWRP recovery if they want to upgrade. If you want to make a hard reset or factory reset values is obligatory to use the Original Recovery, if they do not the terminal will not start.)
Google Apps
SuperSU Chainfire v2.13
Make a backup of the system ROM if it were not supported by your terminal. It can be done with MtkDroidTools
Make a backup of the IMEI with MtkDroidTools before making Flash
Adding this Mtkdroidtools for you can reinstall the IMEI and you can backup the IMEI.
Installation:
!!!I recommend backing up the nvram with Mtkdroidtools before using Spflashtool to keep the imei, otherwise there would then insert the end of the process once the terminal with the new rom rebooted.!!!!
-Donwload and unpacking SP_Flash_Tool_v5.1348.003.zip and rom ORIGINAL VIBE 2.0 Chinesse version.rar
-Off the phone and remove the battery
-Run SP_Flash_Tool and selected MT6582_Android_scatter.txt on rom directory
-Download press release o download/firmware
-Connect phone without battery
-When the green circle appears the battery and turn on the phone.
-When I start properly, shut down again and go into recovery mode ( pressing first then"Volume + and Volume -" later "POWER" and feel the vibration when you take away the POWER button .
Select languaje english
Select "Wipe user data" and run
Select "fuse format data" and run
select "yes"
Select "Back" and "back"
Select "reboot "
- And wait for it to restart, you can restart several times. It takes a while.
And if all goes well will be all set.
This ROM has been tested on a Chinese version terminal S660 and it worked all components.