Not officially supported, but might work on K910L and K910e
CM11 ROM Highlights
- No manufacturer pre-installed crappy software, you choose what to install!
- Privacy Guard, you choose what permission apps can have!
- Lots of UI tweaks, you choose the UI features!
- CM Theme Engine (lots of themes available)
- Overall fast & smooth
- Good battery life, better than stock
- Uses less RAM than stock
- Performance modes (also power save mode)
- Good multilanguage support
- Pre-rooted
- DSP Manager (equalizer)
- And all other cyanogenmod goodies! Too much to list here 
http://www.howtogeek.com/192602/8-reasons-to-install-cyanogenmod-on-your-android-device/
http://www.guidingtech.com/31133/8-power-features-cyanogenmod-11-might-know/
K910 firmware update recovery flashable zips:
See download links @ top of the page.
From VIBEUI v1511: k910_firmware_update_v1511 (latest, recommended)
NOTE: FW UPDATE ZIP ONLY FOR K910, not for K910e or K910L
Changelog
cm-11-20150406-UNOFFICIAL-kiton ST6
- Sync with CM11 repo
- Stable release with known issues
- No more big updates, moving to CM12
NOTE: First boot takes longer time, because SC6500 modem FW update (blue led blinks)
- K910e: CDMA data reported not working (Will not be fixed, as we dont have possibility to test it)
- DUALSIM: CM11 MSIM In-call UI crash when call is active and open dialpad + press back.
Work around: Just open in-call ui again from status bar.
- DUALSIM: Bluetooth headset cannot control dialer. Some BT systems do not work at all (no audio)
- DUALSIM: SIM2 mobile data not working.
- n1tro
- kacer
- Sir_Bommel
- blackpac
- richy4
- sgardev
- Remco ** ****
- misot
- kontax
- Pino13
- Платонов ****
- wot-hac
- Михаил ********
- jamiev90
- alexalexchic
- Alessio B.
- Aniello F*****
- didonch
- Nikolay A******
- maprotech
- dark72
- andomanju
- Jorge G***** M******
- wot-hac
- S34d0g
- papuse g****
- smcsekar
- Fernando G********
- Macrom
- Antoinex01
- Fabio I********
What's working:
- DUAL SIM (Enable in ROM Extra Settgins)
- Double tap to wake (Enable in ROM Extra Settgins)
- Smart cover (Enable in ROM Extra Settgins)
- SIM1 RIL (mobile network & data)
- SIM2 RIL (mobile network)
- Wifi
- Bluetooth
- GPS
- Network location
- Audio (playback/input/routing/headphones/etc)
- Camera (photos, camcorder & panorama)
- Hardware acceleration and OpenGL rendering
- Hardware video decoding & encoding (mostly)
- USB, USBOTG
- Wifi-tethering
- Sensors
- LEDs
- FM radio
- Performance modes
- Multilingual
- "Charging only" mode
-
All cyanogenmod goodies
![;)]()
Performance profiles explained:
How to install:
NOTE: If you dont have custom recovery installed yet, please see instructions for that elsewhere. (see TS CWM recovery page)
1) boot into CWM (or similar) recovery (TS CWM recommended)
2) backup and restore -> backup
When coming from other ROM: (or want to clean install)
3.1) mounts and storage -> format /system
3.2) wipe cache, dalvik-cache, data and factory reset
When updating existing superluminal CM11 ROM:
3.1) wipe cache, dalvik-cache
4) install cm-11-xxxxxxx-UNOFFICIAL-TS-kiton.zip (select from storage or via adb sideload)
5) install gapps (if you need/like)
5.1) Gapps can be downloaded from various sources. For example from here or here
6) reboot
7) profit 
NOTE: All changes in system partition are lost when you update ROM. (e.g. lenovo camera addon)
Since build cm-11-20150308-UNOFFICIAL-kiton you will also receive OTA updates through CM Updater.
FAQ:
Q: How to enable Smart cover, Dual SIM or Double tap to wake support?
A: Open 'ROM Extra Settings' from application drawer and enable smart cover service.
Q: Where are performance modes?
A: Pull down quick settings from status bar and click '+' to add performance icon
Q: I can't find developer options and performance settings, why?
A: Settings -> About phone -> Click 'Build number' several times
Q: I don't have reboot options in power menu, why?
A: Settings -> Developer options -> Advanced reboot
Q: Is it possible to use Lenovo stock camera app?
A: Yes, you can download camera addon zip from download section. File must be installed from recovery mode.
Q: Why power button does not wake device?
A: Yes it does! You're just covering proximity sensor. There's "prevent accidential wakeup" option enabled by default.
Reporting Bugs:
1) Grab a logcat right after/during the problem has occurred. (Please include at least a few pages of the log, not just the last few lines, unless you know what you're doing.)
in case of modem bugs, also "logcat -b radio" is needed. If possible log must be captured all way from boot.
2) If it is a random reboot, grab /proc/last_kmsg. (Do not bother getting a logcat unless you can get it just before the reboot. A logcat after a reboot is useless)
3) If the problem disappears after running "setenforce 0" from a root shell, grab /data/misc/audit/audit.log
Remember to provide as much info as possible. The more info you provide, the more changes there are we can reproduce bug and possible fix it. Please also do not report known issues. The following is a useful format to follow:
What is your phone model (K910, K910L, K910e, etc..)
- ROM Version
Are you using:
- a task killer.
- ART Runtime.
- Dual SIM.
- other modifications; Provide any additional information (observations/frequency of problem/last version it worked on/etc) as needed.
We have spent ernomous amount of time for porting this ROM.
All work is done in our spare time. We give this for you as free of charge.
If you like our work, please consider donating some money for a new porting equipments.
Or just few bucks for team members to have a nice cold beer after long day of coding
ENJOY!
- Morphic, Team Superluminal
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you. Hard. A lot.
*/