The author and the forum administration does not bear any responsibility for damage to your equipment.
You must understand what you are doing.
Vibe UI 2.0 (ROW)
The machines produced for the Chinese market has not been tested.
Firmware is made on the basis of ports: Lenovo S650 – VIBE 2.0 (ROW) and Lenovo A328 – custom firmware VibeUI 2.0
Firmware with GAPS, the possibility of porting applications to MicroSD and connection to a PC as a USB flash drive
Before flashing to do all wipes are also in addition to MicroSD and System
And of course do not forget about backups flash and NVRAM
Installation via custom rekaveri
Firmware unofficial firmware
1) Download the firmware that you need and put it in the root of the memory card.
2) is loaded into the mode of a custom rekoveri TWRP.
3) Go to your point Wipe.
4) Press “Advanced wipe”
5) Put a check mark everywhere except “Micro SD and System” and move the spayp right, wait at the end if you put AOSP then just turn it off or pull the battery, go back to rekoveri.Esli you install AOSP is not returning to the main menu .
6) Come to the point of Install, click on the bottom Select Storage “and select Mcro SD presses ok find firmware Tapan on it and move the swipe right, wait for okonchaniyuzhmete Reboot, offers supersu – if you need to move the swipe to the right if you do not have to give up.
Ready
will also need to install the patch selection MicroSD memory:
patch vibration buttons:
qiwi wallet +79662402712