X2-CU_USR_ST1520_5.28.1_1505111245_MP11V1.9_CN
Warning: This firmware is suitable only for Lenovo Vibe X2-CU! I don't take any responsibility for your devices! Use at your own risk!
Installation:
1. Open flash_tool.exe from X2_flashtool_20140812(v5.1428.05.000) folder
2. In Flashtool, select the MT6595_Android_scatter.txt from the target_bin folder. Wait file to be added into Flash Tool
3. Make sure “DA DL All with Checksum” is checked in Options -> Options -> Download OR YOUR PHONE WILL FAIL TO BOOT!
4. Turn off your phone.
5. Select "Firmware Upgrade" or "Download only", but do not use "Format All + Download", because you will lose your IMEI and MAC
6. Press Download
7. Connect your phone into the computer via USB data cable.
- install driver from Drivers folder, if needed (you may have to disable Windows Driver Signature Enforcement)
- The process will start and a red progress bar will appear after, yellow, grey and green circles is displayed, the phone is successfully flashed
8. Disconnect the USB cable from the phone and turn it on. It will take few minutes for the phone to boot for first time
Changes: Improved camera and wifi stability, updated compass.
Sorry for the splitted archive, but need rom has 850MB file limit. You will need 7zip to decompress the files (Download from 7zip.org). Enjoy!
And remember to rate my roms and profile. Thank you!