Languages: EN/CN/RU
ATTENTION!!! Before installing the firmware Recovery (TWRP/CWM) S750 Lenovo VIBE UI 2 + AROMA Installer, you must reallocate the memory this Lenovo-S750_partition_VIBE.zip patch (resized system and data). Previously posted patches relabeling include memory not suitable for this firmware.
Installation instructions for firmware Recovery (TWRP/CWM) S750 Lenovo VIBE UI 2 + AROMA Installer
- Throws a patch Lenovo-S750_partition_VIBE.zip and Lenovo S750 firmware VIBE UI 2 + AROMA Installer onto the SD card
- go in recovery
- install the patch
- Parashurama again in recovery
- do a wipe of internal memory emmc, data, cache (for twrp: wipe -> advanced wipe -> emmc, data, cache)
- back to main menu of recovery
- install the firmware
Attention!!! All your installed programs and your personal data on internal memory will be deleted. Be careful about their safety
– Attention!!! When sewing this method changes the memory layout which is different from the standard.
If you want will return to the standard layout you will need to repeat the process with the stock firmware for SP Flash Tool.
Decompress the archive with firmware for SP Flash Tool go to the folder with SP Flash Tool and run the program flash_tool.exe.
On the Download tab select MT6589_Android_scatter_emmc.txt in the folder of the unpacked firmware image.
Go to the tab Format. Click START and connect powered off phone (preferably with extended battery).
Wait until the program will say OK. Disconnect the phone and go to the tab Download, press Download and connect the phone.
Waiting for the end.
After the program completes, disconnect the phone from the usb cord, plug the battery and run our favorite!.
I look forward to when the phone will boot, go through the initial phone setup, on requests from Supersu answer is Yes.
Then plug our phone to the usb cord. Pop up window (Settings USB connection).
Put a check next to "Usb Debugging"
Further, the nvram restores. Run the program MTK Droid Tools click on ROOT button.
On the phone POPs up a window with a resolution connect via ADB. Say YES and wait until MTK Droid Tools will get root shell
Click the button IMEI/NVRAM, in the resulting window, select RESTORE. And ukazyvat the path to the previously saved NVRAM backup
Reboot and enjoy )))