Quantcast
Channel: » LENOVO
Viewing all articles
Browse latest Browse all 3149

Lenovo S60-a 5.0.2 STOCK

$
0
0

First charge the phone battery to 100% ! (seriously u can't replace the battery or charge in another way)

 

Known modes:
Vol+
+ connect USB on turned off phone = Download Mode (Qpst, Qfill)
Vol- + connect USB on turned off phone = Diag Mode
Vol+ + Vol- + Power Button = Lenovo Recovery (there is an option to turn off phone), this is the simplest way to turn off the phone:
hold Vol- and Vol+, hold Power and wait for reset. Chose english > Turn off

 

Flashing  S60-W with this rom:
After flash your phone could switch to Marshall London HS-USB Diagnostics 9006 in this mode first do the backup all partitions with EMMC RAW TOOL. Then you can flash with MiFlash or write partitons with emmc but first read instructions:
https://tosiek.pl/rescue-from-marshall-london-hs-usb-diagnostics-9006-mode/


Info:
I've got prepared img files for QPST flash from original S60-a_S232_151021_ROW because i can't find other than OTA update.zip. This is Eruopean ROM Version for Lenovo S60.

Version info:
Lenovo S60-a Stock ROM 5.0.2
S60-a_S232_151021_ROW


 

Updated from version:

S60-a_S227_150806_ROW
S60-a_S223_150716_ROW
S60-a_USR_S223_1507161740_Q2040.1_ROW
S60-a_S212_150504_ROW

Warning:
This ROM will wipe all userdata! Except external SD Card.
If phone after flash won't boot up and only long vibrating long hold: VOL- and POWER BUTTON (30-120seconds). Phone should restart.It happens when you will flash from other versions loader (for example 5.0.2 -> 4.4.4 or 4.4.4 -> 5.0.2). Why? Because old loaders is running and you have flashed the new one so you have to restart the phone but u can't remove the battery and u have to long press PWR Button.

Warning 1:
If something went wrong and phone is long vibrating and windows see Qualcom MMC (a lot of drives) u can repair it by flashing emmc with MiFlash and then HOLd VOL- and power Button and plugin USB Cable.
(alternative u can flash manually with:
EMMCRAW_1.4.0.0.exe, firstly load partition table gpt_main0.bin)

Warning 2:
After flash you should make factory reset. Turn off the phone, hold VOL- and push power button. Choose Factory reset (it wipe all userdata except external sdcard) and press start.

This is not necessery.


Warning 3:
First boot after flash will take up about 10 minutes. It has to prepare /data partition. Seriously not an hour but long time.

After 1hour hang u can hold VOL- and hold POWER button in the same time for 30-120seconds. Phone will reset in recovery mode. Then choose factory reset, afer factory reset phone will Power Off. Disconnect USB, phone should have black screen. Hold VOL+ and connect USB again. Phone will connect in Download Mode QDload flash it again with QFIL.

You should first backup QCN (imei etc.)! How to:

  1. Download and install QPST 2.7.422 with QFIL and Qualcomm USB Drivers and LenovoUsbDriver-1.0.12.
  2. Turn off the phone. Hold Vol- button and plug-in USB Cable. (VOL- and Power Button runs something like recovery menu)
  3. There should be devices in device manager: Ports COM called:
    Lenovo HS-USB Diagnostics (COMXX)
    and
    Lenovo HS-USB NMEA (COMXX)
    If there is no devices u have to install it manually in device manager.
  4. Choose backup MRD data (first put SD card inside)
  5. Run QFIL, check is there a correct diagnostic port COM. On the top click: Tools > QCN Backup Restore
  6. Choose path with write permission, click Backup QCN
    QFIL

How to flash:

Charge the phone 100% and make QCN backup! Then do the factory reset.

  1. Download and install QPST 2.7.422 with QFIL and Qualcomm USB Drivers.
  2. Turn off the phone. Hold Vol+ button and plug-in USB Cable. Phone will vibrate one time, screen wil be black. This is DownloadMode.
  3. There should be device called in device management:
    Qualcomm HS-USB QDLoader 9008 (COMXX)
    In any other case u have to install drivers manually.
  4. Run QFIL.
    Click Browse… in Programmer Path and choose prog_emmc_firehose_8916.mbn
    Load XML in Download Section:
        First select RawProgram File: rawprogram0.xml
        then Select Patch File: patch0.xml
  5. Check all inputs is correct and click Download under Load XML button and wait about 5 to 10 minutes:

     

In emergency cases:
How to reset phone from QDLOader Mode: hold power button for 30-120 seconds
other possibility: hold vol- and vol+ and pwr button (all buttons) for some time
or try hold any button and connect USB.
Another emergency: Hold VOL- and Power Button and plug in usb cable.

 

Warning!!! Info about chineese version Lenovo S60-w

I have sucessfully flashed this images 5.0.2 on my china S60-w version. After that phone is visible everywhere as S60-a.
System OTA update works.

You shouldn't flash back to 4.4.4 (different loaders). You can do it but sometimes u have to do reset the phone (long hold power button for 1 minute) after reflash.

But im not reposnibility of any fails, do it for you own. There is stock 4.4.4 ROM for chineese version S60-w if something went wrong: http://www.needrom.com/download/lenovo-s60-w-stock-rom/ and S60-a stock 4.4.4: http://www.needrom.com/download/lenovo-s60-a-4-4-4-stock/


Viewing all articles
Browse latest Browse all 3149

Trending Articles



<script src="https://jsc.adskeeper.com/r/s/rssing.com.1596347.js" async> </script>